Farm supplies & sourcing
Harvest crate openings for small produce in Hawaii
Specify the opening sizes as well as the outside dimensions when ordering harvest crates from China for a Hawaii farm. Give the supplier the size range of produce the crate must retain, then review a drawing and representative sample before accepting the model.
Check every opening the produce can reach
Ask the supplier to mark the width and length of the largest openings on each side and on the base. Include corner gaps and any handgrip cut-outs the produce could reach at the planned fill level. Get dimensions on a drawing for the quoted model, alongside separate close-up photographs.
IPL Schoeller describes its 9300028 harvesting container as perforated, with a base that has drain holes. Use that distinction when requesting information for your own order. A general description such as “ventilated” leaves the opening pattern and dimensions to be confirmed.
Use samples from the smaller produce you accept
Have the person responsible for crop grading choose samples from the lower end of the size range the operation accepts. Record the crop, size range and condition of those samples. Agree the fill level and handling steps that the review needs to cover, including any movement that brings produce against the sidewalls.
Ask the supplier to identify the crate used and record any items that escape, including where they pass through. Keep the result with the sample description and handling conditions. Have your crop-handling lead decide whether that result meets the intended use.
If representative produce is unavailable to the supplier, agree who will complete the check and when the buyer can decide. Label any stand-in material used in a demonstration and record which questions remain open.
Review a proposed liner with the crate
If the supplier proposes a liner, add its exact material, dimensions and opening pattern to the sample review. Ask the team responsible for crop handling to review its cleaning, drainage and cooling requirements for the intended use. Include those questions before accepting the configuration.
Request the same liner in the sample and the purchase specification. State whether it is included in the basket price and how replacement liners will be identified. A photograph of the bare basket leaves the proposed liner unreviewed.
Keep the accepted pattern on the purchase record
List the supplier item reference, drawing revision and sample configuration on the order. Ask for a written review of any proposed change to the openings, base pattern or liner before the supplier substitutes it. The photograph on this page is a product reference. Material suitability, load limits and the configuration offered for a new order need their own supporting information.
- Crop and minimum accepted size range defined by the crop-handling lead
- Sidewall, base, corner and relevant handgrip openings dimensioned
- Sample crate, fill level and handling conditions identified
- Escaped items and unresolved checks recorded
- Reviewed liner and drawing revision matched to the quote
For a Super Value Hawaii sourcing review, send the proposed crate drawing, crop size range, sample observations and order quantity. Include the destination island. Once the model is selected, we can review the separate packing and transport information. Island handover arrangements and costs are assessed for the actual cargo and destination.